¿Qué está buscando?

Busque por artículos, productos, soluciones, etc...

¡Lo lamentamos!

Ningún resultado de búsqueda encontrado.

Inscripción

¿Ha olvidado su contraseña?

Are you a new customer?

Register and get many benefits:

Checking the product availability
Fast reordering & order history
Personal product recommendation
Payment by invoice
Registrarse ahora

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Phone
+1 713-466-6673
Opening hours 8-5, Monday - Friday

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
FAQs

K- 07 25 02 84

Pressure regulator inline

Pressure regulator inline

K-07250284

The product image may differ

K-07250284
Modelo 3D
K-07250284 K-07250284
Modelo 3D
Thread
G 1/4″ -19 
Flow
600 - 800 l/min 
Working pressure preset
3.0 bar 
Descargar PDF

Seleccione un modelo

Show table of articles

Article

K- 07 25 02 83 K- 07 25 02 84 K- 07 25 02 85 K- 07 25 02 86 K- 07 25 02 87 K- 07 25 02 88 K- 07 25 02 89 K- 07 25 02 90 K- 07 25 02 91 K- 07 25 02 92 K- 07 25 02 93 K- 07 25 02 94 K- 07 25 02 95 K- 07 25 02 96
Detalles del producto a

K- 07 25 02 84

Thread
G 1/4″ -19
Flow
600 - 800 l/min
Working pressure preset
3.0 bar
A
56.6 mm
SW
16 mm
Todas las características

Características

Housing
  • aluminium 
Max. working pressure
  • max. 25 bar 
Other parts
  • stainless steel, nitrile rubber, brass 
Temp. range
  • 0 °C to 80 °C 
Customs tariff number
  • 84811099 
Todas las características

Product description

Notas
Further information on request.
Descripción
The majority of pneumatic tools are connected directly to the compressed air supply by means of a quick disconnect coupling, in other words they tend to be supplied with a higher pressure than is actually required. Which increases consumption and leads to tool overload. Added safety is provided by the automatic self-relieving function. If the tool is disconnected from the hose, it continues to work for a short period, even though it has been switched off, owing to the residual pressure that is present on the tool side. Inadvertent operation of the tool can thus lead to serious injuries to the user (tackers or nail drivers can fire up to another ten shots). This effect can be prevented by using the inline pressure regulators, which have a preset pressure determined by the application, thereby achieving energy efficiency and economy.

Variantes de producto

14 Resultados
Búsqueda
Mostrar dibujo acotado
Denominación
Thread
Flow
Working pressure preset
A (mm)
K- 07 25 02 83
G 1/4″ -19 
600 - 800 l/min 
2.0 bar 
56.6 mm
Averiguar más
K- 07 25 02 84
G 1/4″ -19 
600 - 800 l/min 
3.0 bar 
56.6 mm
Averiguar más
K- 07 25 02 85
G 1/4″ -19 
600 - 800 l/min 
4.0 bar 
56.6 mm
Averiguar más
K- 07 25 02 86
G 1/4″ -19 
600 - 800 l/min 
5.0 bar 
56.6 mm
Averiguar más
K- 07 25 02 87
G 1/4″ -19 
600 - 800 l/min 
6.0 bar 
56.6 mm
Averiguar más
K- 07 25 02 88
G 1/4″ -19 
600 - 800 l/min 
8.0 bar 
56.6 mm
Averiguar más
K- 07 25 02 89
G 3/8″ -19 
2000 l/min 
2.0 bar 
63 mm
Averiguar más
K- 07 25 02 90
G 3/8″ -19 
2000 l/min 
4.0 bar 
63 mm
Averiguar más
K- 07 25 02 91
G 3/8″ -19 
2000 l/min 
6.0 bar 
63 mm
Averiguar más
K- 07 25 02 92
G 3/8″ -19 
2000 l/min 
8.0 bar 
63 mm
Averiguar más

Shows 10 of 14

Column selection

Thread
Flow
Working pressure preset
A (mm)
SW (mm)