HK SP CAE 110AC

Solenoid coil 110VAC for HKDKE AC

The product image may differ

Nominal voltage +/- 10 %

110 V AC

Corresponding connectors

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 110

Average power consumption

95 W

Download PDF

Please choose a variant

Show table of articles

HK SP CAE 12DC HK SP CAE 24DC HK SP CAE 110AC HK SP CAE 230AC HK SP CAE 220DC

Product details for

HK SP CAE 110AC

Nominal voltage +/- 10 %

110 V AC

Corresponding connectors

HK SP 664, HK SP 664 A, HK SP 666, HK SP 666 A, HK SP 667 110

Average power consumption

95 W

Characteristics

Customs tariff number

85059029

Product description

Notes

In case of AC coils the power input is significantly higher in the considerably phase than in the holding phase. These must therefore never be operated without a magnet core since there is a danger of overheating and the coil can burn through. A similar effect occurs if valves with AC magnets are operated with extremely high pulse frequencies (On / Off). In such cases the coils, which are often in the vicinity of the high power input, can also overheat. For such applications the use of RC coils with rectifier plugs is recommended.
With DC coils extremely high power spikes can occur during powering down. We therefore recommend the use of plugs with protective circuits when using such coils.
Tightening torque for attaching nuts of the solenoid coils: 3Nm

Ordering information

Other types of coil available on request

Delivery scope

With O-ring