¿Qué está buscando?

Busque por artículos, productos, soluciones, etc...

¡Lo lamentamos!

Ningún resultado de búsqueda encontrado.

Inscripción

¿Es cliente nuevo?

Regístrese y asegúrese muchas ventajas:

Control de la disponibilidad de productos
Nuevo pedido rápido e historial de pedidos
Recomendaciones personales de productos
Pago mediante factura

Help & Contact

Póngase en contacto con HANSA-FLEX

¿Tiene alguna pregunta sobre la tienda en línea o nuestros productos?
Puede contactar con nuestro servicio de atención al cliente en:

Opening hours 8-5, Monday - Friday

O utilice nuestras preguntas frecuentes

Aquí obtiene respuestas a las
preguntas más frecuentes.

Helping people help themselves
A las preguntas frecuentes

TAF 106 CU

Thermoplastic hose AF6.3 copper braid
DN*
Inch
1/4″ 
Size
Descargar PDF

Seleccione un modelo

Mostrar tabla de artículos
Detalles del producto a

TAF 106 CU

DN*
6
Inch
1/4″
Size
4
Inside Ø
6.3 mm
Outside Ø
11.2 mm
WP* at 20 °C
255 bar
WP* at 50 °C
225 bar
WP* at 80 °C
190 bar
Burst pressure
510 bar
Bend radius min.
63 mm
Todas las características

Características

Inner tube
  • polyamide (PA) 
Reinforcement
  • one polyester braid with a copper wire spiral for dissipating electrostatic charge 
Cover
  • DN 4: polyamide, from DN 6: polyurethane 
Application
  • electrically conductive paint spray hose with high flexibility and low weight 
Colour
  • black 
Elongation
  • + 3 % to - 1 % 
Media
  • resistant to many technical media 
  • particularly the paints and solvents used in paint spraying 
Special features
  • with copper braid spiral 
  • favourable flow properties 
  • high resistance to light, weathering, ageing, chemical media 
Temp. max.
  • 80 °C
Temp. min.
  • -60 °C
Customs tariff number
  • 39173100 
Todas las características

Descripción de productos

Notas
Assembling with swage or reusable fittings.
The change in length of the hose is determined at max. working pressure during testing according to EN ISO 1402
Paint spray hoses are subject to the guidelines for liquid jet equipment (ZH 1-406) by the employers’ liability insurance association. Follow these guidelines when assembling.

Variantes de producto

2 Resultados
Mostrar dibujo acotado
Denominación
DN*
Inch
Size
Inside Ø (mm)
1/8″ 
4 mm
Averiguar más
1/4″ 
6.3 mm
Averiguar más
DN = nominal diameter, nominal width
WP = working pressure

Column selection

DN*
Inch
Size
Inside Ø (mm)
Outside Ø (mm)
WP* at 20 °C (bar)
WP* at 50 °C (bar)
WP* at 80 °C (bar)
Burst pressure (bar)
Bend radius min. (mm)
DN = nominal diameter, nominal width
WP = working pressure