Compressed air technology

0 - 35 bar, maximum static working pressure (non-pulsating)  max. 10 bar  max. 16 bar  -0.99 bar - 15 bar  0 - 10 bar  60 bar  0 - 35 bar  1.5 - 8 bar  max. 40 bar  2.5 - 10 bar (monostable), 1.0 - 10 bar (bistable), vacuum up to 10 bar (in case of external supply air)  dependent on operating temperature; max. 10 bar (at 20 °C); max. 1 bar (at 60 °C)  max. 12 bar  max. 16 bar (at +20 °C)  0.5 - 10 bar  max. 20 bar  0 - 8 bar  max. 63 bar (depending on temperature and nominal size)  2 - 10 bar  dependent on operating temperature; max. 10 bar (at 20 °C); max. 1 bar (at 170 °C)  dependent on operating temperature; max. 10 bar (at 20 °C); max. 2.5 bar (at 90 °C)  max. 8 bar  2.5 - 10 bar  max. 25 bar  max. 250 bar brass, max. 400 bar if steel / stainless steel  max. 70 bar (depending on temperature and nominal size)  0.5 - 60 bar  1 - 10 bar  2.5 - 10 bar (monostable), 1.0 - 10 bar (bistable), vacuum up to 10 bar (external pilot air)  2.5 - 10 bar; Max. vacuum 10 bar (external pilot air)  2.5 - 7 bar  -0.99 - 20 bar  0.5 - 12 bar  1 - 35 bar and rough vacuum  liquidscolon 40 / 32 bar depending on the port size; gascolon max. 5 bar (MOP 5)  max. 12 bar, static working pressure (non-pulsating)  max. 15 bar  max. 40 bar (to DN 32); max. 25 bar (from DN 40); max. 16 bar (from DN 65)  max. 64 bar  vacuum up to 10 bar  0.2 - 50 bar  10 bar  2.5 - 8 bar  DN 15 - DN 32colon max. 40 bar; DN 40 - DN 50colon max. 25 bar  max. 14 bar  max. 16 bar for valves with cutting ring connection; max. 4 bar for valves with pipe thread  max. 160 bar (G 3/8″, G 1/2″); max. 100 bar (G 3/4″, G 1″); max. 60 bar (G 1 1/4″, G 1 1/2″); max. 40 bar (G 2″)  max. 18 bar  max. 28 bar  max. 63 bar  min. 0.35 bar; max. 8.5 bar  0 - 16 bar  0.2 - 26 bar  0.5 - 20 bar  0.99 - 20 bar  15 bar (12 bar at G 1″)  16 bar  2 - 16 bar  2 - 25 bar  2.5 - 10 bar (monostable, 1.0 - 10 bar (bistable), vacuum to 10 bar  4.5 bar  5 bar  DN 15 - DN 50colon max. 40 bar; DN 65 - DN 100colon max. 16 bar  Max. 16 bar; 13.5 x 9.5 mm hosecolon max. 12 bar  max. 10 bar (to the temperature +20 °C); max. 7 bar (at temperature +40 °C); max. 5 bar (at temperature +60 °C)  max. 11 bar  max. 12 bar (K-07100622); max. 20 bar (K-07100623)  max. 200 bar  max. 24 bar  max. 25 bar (on stem)  max. 25 bar (on thermowell)  max. 400 bar (at 20 °C); max. 250 bar (at G 1 - 20 °C)  max. 55 bar (depending on temperature and nominal size)  max. 6 bar  max. 6 bar (copper alloy), max. 25 bar (stainless steel)  max. 6 bar (on thermowell)  max. 70 bar (depending on operating temperature)  max. 9 bar  min. 0.0 bar; max. 15.0 bar  min. 2 bar; max. 6 bar  min. 4 bar; max. 16 bar 

24° inner cone  brass seal with rubber insert  butt construction  cutting ring connection  flat seal  for screw-in pins with shapes A, B and if necessary E  rubber sealing ring  shape A 

4.0 mm 5.0 mm 6.0 mm 8.0 mm 9.0 mm 10.0 mm 11.0 mm 12.0 mm 12.5 mm 14.0 mm 15.0 mm 16.0 mm 18.0 mm 18.5 mm 19.0 mm 20.0 mm 21.0 mm 22.0 mm 23.0 mm 24.0 mm 25.0 mm 26.0 mm 27.0 mm 28.0 mm 29.0 mm 30.0 mm 33.0 mm 34.0 mm 38.0 mm 42.0 mm 48.0 mm 55.0 mm 60.0 mm

0.2 bar  0.25 bar  0.27 bar  0.3 bar  0.35 bar  0.38 bar  0.4 bar  0.45 bar  0.5 bar  0.5 to 1.0 bar  0.55 bar  0.6 bar  0.65 bar  0.7 bar  0.75 bar  0.8 bar  0.83 bar  0.9 bar  1.0 bar  1.0 to 4.0 bar  1.1 bar  1.2 bar  1.25 bar  1.3 bar  1.4 bar  1.5 bar  1.6 bar  1.7 bar  1.75 bar  1.8 bar  1.9 bar  10.0 bar  10.0 to 18.0 bar  10.1 bar  10.2 bar  10.3 bar  10.4 bar  10.5 bar  10.6 bar  10.7 bar  10.8 bar  10.9 bar  11.0 bar  11.2 bar  11.3 bar  11.4 bar  11.5 bar  11.6 bar  11.7 bar  11.76 bar  11.8 bar  12.0 bar  12.1 bar  12.2 bar  12.3 bar  12.4 bar  12.5 bar  13.0 bar  13.2 bar  13.3 bar  13.5 bar  13.8 bar  14.0 bar  14.2 bar  14.3 bar  14.5 bar  14.7 bar  14.8 bar  15.0 bar  15.1 bar  15.2 bar  15.3 bar  15.4 bar  15.5 bar  15.6 bar  15.7 bar  15.8 bar  16.0 bar  16.0 to 32.0 bar  16.5 bar  16.8 bar  16.9 bar  17.0 bar  17.1 bar  17.5 bar  17.6 bar  18.0 bar  18.5 bar  18.9 bar  19.0 bar  19.1 bar  19.4 bar  19.5 bar  19.6 bar  19.7 bar  19.8 bar  2.0 bar  2.1 bar  2.2 bar  2.3 bar  2.4 bar  2.5 bar  2.6 bar  2.7 bar  2.8 bar  2.9 bar  20.0 bar  20.5 bar  20.8 bar  21.0 bar  21.5 bar  22.0 bar  22.1 bar  22.5 bar  22.7 bar  22.8 bar  23.0 bar  23.1 bar  23.2 bar  23.4 bar  23.5 bar  24.0 bar  24.5 bar  25.0 bar  25.2 bar  25.5 bar  26.0 bar  26.5 bar  26.6 bar  27.0 bar  27.2 bar  27.5 bar  27.6 bar  27.9 bar  28.0 bar  28.5 bar  28.6 bar  29.0 bar  29.4 bar  29.5 bar  3.0 bar  3.0 to 7.0 bar  3.1 bar  3.2 bar  3.3 bar  3.4 bar  3.5 bar  3.6 bar  3.7 bar  3.8 bar  3.9 bar  30.0 bar  30.0 to 60.0 bar  30.5 bar  30.8 bar  31.0 bar  31.5 bar  32.0 bar  32.5 bar  33.0 bar  33.3 bar  33.5 bar  33.7 bar  34.0 bar  34.1 bar  34.5 bar  35.0 bar  35.5 bar  36.0 bar  36.3 bar  36.4 bar  36.5 bar  36.8 bar  37.0 bar  37.5 bar  38.0 bar  38.5 bar  39.0 bar  39.5 bar  4.0 bar  4.1 bar  4.2 bar  4.3 bar  4.4 bar  4.5 bar  4.6 bar  4.7 bar  4.8 bar  4.9 bar  40.0 bar  40.5 bar  41.0 bar  41.5 bar  42.0 bar  43.0 bar  43.4 bar  43.5 bar  44.0 bar  44.8 bar  45.0 bar  46.0 bar  47.0 bar  47.5 bar  48.0 bar  5.0 bar  5.1 bar  5.2 bar  5.3 bar  5.4 bar  5.5 bar  5.6 bar  5.7 bar  5.8 bar  5.9 bar  50.0 bar  6.0 bar  6.0 to 12.0 bar  6.1 bar  6.2 bar  6.3 bar  6.4 bar  6.5 bar  6.6 bar  6.7 bar  6.8 bar  6.9 bar  7.0 bar  7.1 bar  7.2 bar  7.3 bar  7.4 bar  7.5 bar  7.6 bar  7.7 bar  7.8 bar  7.9 bar  8.0 bar  8.1 bar  8.2 bar  8.3 bar  8.4 bar  8.5 bar  8.6 bar  8.7 bar  8.8 bar  8.9 bar  9.0 bar  9.1 bar  9.2 bar  9.3 bar  9.4 bar  9.5 bar  9.6 bar  9.7 bar  9.8 bar  9.9 bar 

2.0 mm 2.7 mm 3.0 mm 3.3 mm 4.0 mm 5.0 mm 5.5 mm 6.0 mm 7.0 mm 7.5 mm 8.0 mm 9.0 mm 10.0 mm 11.0 mm 12.0 mm 12.5 mm 13.0 mm 14.0 mm 15.0 mm 16.0 mm 18.0 mm 19.0 mm 20.0 mm 22.0 mm 23.0 mm 25.0 mm 25.4 mm 30.0 mm 32.0 mm 38.0 mm 45.0 mm 50.0 mm 50.8 mm 63.5 mm 76.2 mm

60.0 °C 70.0 °C 80.0 °C 85.0 °C 90.0 °C 95.0 °C 100.0 °C 150.0 °C 200.0 °C

(-20 °C to +80 °C quickconnect-safety couplings)  -10 °C to +100 °C  -10 °C to +150 °C  -10 °C to +50 °C  -10 °C to +50 °C (piston diameter 40 mm), -10 °C to +60 °C (piston diameter 63 mm)  -10 °C to +60 °C  -10 °C to +60 °C (Ø 20 to Ø 63)  -10 °C to +70 °C (Ø 80 to Ø 125)  -10 °C to +75 °C (plug amplifier), -10 °C to +60 °C (chopper amplifier)  -10 °C to +80 °C  -10 °C to +80 °C (Ø 80 to Ø 100)  -15 °C to +80 °C  -20 °C to +100 °C  -20 °C to +120 °C  -20 °C to +120 °C (G 3/4″ to G 2″)  -20 °C to +300 °C (at 20 bar)  -20 °C to +60 °C  -20 °C to +70 °C  -20 °C to +70 °C (Ø 32 to Ø 63)  -20 °C to +80 °C  -20 °C to +80 °C (G 1/4″ to G 1/2″)  -40 °C to +200 °C (depending on the hose quality and diameter)  -40 °C to +90 °C  -5 °C to +45 °C  0 °C to 50 °C  0 °C to 60 °C  0 °C to 70 °C  0 °C to 80 °C  0 °C to 90 °C  5 °C to 80 °C  5 °C to 90 °C  air: -20 °C to +130 °C  air: -20 °C to +150 °C  from -35 °C to 85 °C  gas: - 20 °C to + 60 °C  max. +150 °C  max. 50 °C (G 1/8″), max. 90 °C (G 1/4″, G 3/8″)  max. 60 °C  max. 75 °C  miscellaneous: -20 °C to +150 °C  temperature peaks up to 120 °C  Up to +70 °C  water: (0 °C to +120 °C)  water: (0 °C to +130 °C)  water: (0 °C to +150 °C)  Without steam 

against + switching  aluminium bracket  aluminium flat jacket  angle connector with wall connecting plate  anodised aluminium  ball seat valve (ball seat, brass)  blanking screw, with hexagon head  blanking screw, with hexagon socket  Brass sleeve for claw coupling with brass seal.  bulkhead connector  cap coupling  centrifugal principle-filter  centrifugal principle-filter, membrane pressure regulator with secondary venting, oil mist lubricator  clamp ring  claw hose coupling  claw outer thread coupling  claw-inner thread coupling  compressed air tank  connecting reducing fittings  connection socket  connector  counter nut  diaphragm pressure regulator with relieving, centrifugal filter  diaphragm pressure regulator with relieving, centrifugal principle-filter, oil mist lubricator  diaphragm pressure regulator with secondary venting  digital flow switch  fiber filter  for bulkhead mounting  hose ring for claw coupling with brass seal  MODY hose coupling  MODY inner thread coupling  MODY outer thread coupling  operated by secondary pressure  pipe sockets  plug in connector  pneumatic actuators, in double- or single acting version  pneumatic actuators, in double- or single acting version, with integrated end-position indicator  pneumatic, double-piston, part-turn actuator, double-rocker principle  poppet valve, spring-loaded  pre-assembled  precision digital pressure switch for excess pressure  push-in connector U-Form  quick release coupling plug  quick release coupling plug, DN 7.2  quick release coupling sleeve  reducing adapters  reducing connecting fitting  reducing connecting socket  replacement chain for sealing claw coupling  Retaining screw for claw coupling with brass seal.  rocker mounted on pin  rotating claw hose coupling  rotating claw inner thread coupling  rotating claw outer thread coupling  rubber ring for claw couplings  rubber ring for MODY couplings  screw-in connectors  screw-in socket  screw-on connector  sealing plugs for connectors  spring-loaded diaphragm (NBR)  spring-loaded diaphragm (NBR); spring-loaded piston; (10 to 70 bar versions)  spring-loaded diaphragm (UR); spring-loaded piston; (10 to 70 bar versions)  spring-loaded, non-return diaphragm valve with adjustable opening pressure  stroke adjustment screw  tube support insert  tube to hose connector  tube union  union nut  with feeder under pressure  with plastic screw cap  with rubber foot  with test connection  with union nut 

abrasion resistant  EPDM  Natural and synthetic rubber, resistant to abrasion, ozone and weather  NBR  Polyamide (PA)  Polyethylene  Polyurethane (PUR)  PVDF  resistant to weather, ozone and UV  SBR smooth  Soft PVC  Soft PVC, black, oil resistant  Soft PVC, blue 

6.0  8.0  10.0  12.0  15.0  16.0  17.0  19.0  20.0  25.0  31.0  32.0  38.0  40.0  50.0  51.0  65.0  80.0  100.0 

1.0  2.0  3.0  4.0  5.0  6.0  7.0  8.0  9.0  10.0  11.0  12.0  13.0  14.0  15.0  16.0  17.0  19.0  20.0  22.0  25.0  29.0  31.0  32.0  35.0  37.0  38.0  40.0  45.0  46.0  50.0  55.0  59.0  65.0  80.0  100.0  125.0  150.0 

5.0 mm 6.0 mm 7.0 mm 8.0 mm 9.0 mm 10.0 mm 11.0 mm 12.0 mm 13.0 mm 14.0 mm 15.0 mm 16.0 mm 17.0 mm 18.0 mm 19.0 mm 20.0 mm 21.0 mm 22.0 mm 23.0 mm 24.0 mm 25.0 mm 26.0 mm 27.0 mm 28.0 mm 29.0 mm 30.0 mm 31.0 mm 32.0 mm 33.0 mm 35.0 mm 36.0 mm 37.0 mm 38.0 mm 39.0 mm 40.0 mm 41.0 mm 42.0 mm 45.0 mm 46.0 mm 48.0 mm 49.0 mm 50.0 mm 54.0 mm 55.0 mm 56.0 mm 57.0 mm 58.0 mm 60.0 mm 65.0 mm 66.0 mm 67.0 mm 68.0 mm 69.0 mm 70.0 mm 71.0 mm 72.0 mm 74.0 mm 75.0 mm 80.0 mm 83.0 mm 85.0 mm 89.0 mm 90.0 mm 98.0 mm 100.0 mm 104.0 mm 125.0 mm

angle 45°  angle 90°  compact type with wing handle  K shaped  L shaped  straight  T shaped  U shaped  Y shaped 

24° inner cone  24° outer cone  60° inner cone  60° outer cone  60° sealing head  butt construction  cutting ring connection  encapsulated O-ring on screw-in socket  flat seal  for screw-in pins with shapes A, B and if necessary E  outer cone  rubber sealing ring  sealed by copper ring  shape A  thread seal  with thread seal made up of pressure and cord ring  without thread seal 

10 - 24 V DC  10 V - 30 V DC  10.8 - 30 V DC  12 V DC  230 / 50 V  230 V / 50 Hz  230 V AC / 50 Hz  230 V AC, 50 Hz  230 V, 50 Hz  230/50 V AC, 50 Hz  24 V DC  24 V DC (for valves and pressure switch)  8 V  9 V - 36 V DC  max. 230 V  max. 250 V AC 

0.0 °C -5.0 °C -10.0 °C -15.0 °C -20.0 °C -25.0 °C -30.0 °C -40.0 °C -60.0 °C

CE, UL/CSA, RoHS  DIN DVGW  DVGW-approval according to DIN 751-1 and DIN 30660  KTW approval for hot water up to +95 °C and pressures up to 16 bar  Product certification DV-5142 AU 0166 

0 - 10.0 bar  0 to 1.5 bar  0 to 16 bar  0 to 20.0 bar  2 to 25 bar  PN 10  PN 12  PN 16  PN 25  PN 35 

aging resistant in oxygen and ozone  air  air and nitrogen  air or neutral gases (filter ≤ 50 µm specified)  air or neutral gases, filtered (50 µm) lubricated or unlubricated  air supply  air, neutral gases (filtered)  air, neutral gases, water, oil  cold and hot water, oils  compressed air and all gases or liquids that are compatible with the materials  compressed air and general hydrocarbons  compressed air containing oil mist  compressed air containing oil mist (RMA Class A)  compressed air, neutral gases  compressed air, non-corrosive gases  compressed air, non-corrosive gases, non-flammable gases  condensate (emulsion)  drinking water  drinking water, nitrogen, compressed air, non-aggressive liquids  dry, oil-free air and non-aggressive gases  Filtered (50 µm), unlubricated or lubricated compressed air. If lubrication is used, it must be continuously lubricated.  filtered, unlubricated compressed air  filtered, unlubricated or lubricated compressed air. Please pay attention to continuous lubrication.  fine-filtered (5 µm), oil-free compressed air, neutral gases  fluid media  grease  inert gases, e.g., N2/CO2  micro-filtered, unlubricated compressed air (0.01 µm)  mineral oil  non-aggressive gases and dry, oil-free air  only for clean compressed air  propellants  resistant against aqueous acids, alkalis and salts and a variety of solvents  resistant to aliphatic hydrocarbons and most lubricating oils  resistant to aqueous acids, alkalis and salts  resistant to hydrolysis and microbes  town gas, liquid gas, methane gas  vacuum  water  water / steam, sea water, salt water, ester, ketone, alkali, caustic soda, sodium hydroxide.  water and ethylene glycol aqueous solution (having viscosity max. 3 mPa · s [3 cP]) 

bourdon-tube pressure gauge acc. to EN 562  bourdon-tube pressure gauge for precision measurements  bourdon-tube pressure gauge in standard design  bourdon-tube pressure gauge with parallel male connector and two separate measuring systems  bourdon-tube pressure gauge, CrNi steel type  bourdon-tube pressure gauge, CrNi steel type, all-stainless steel  bourdon-tube pressure gauge, CrNi steel type, with solid baffle wall and blow-out (safety housing)  bourdon-tube pressure gauge, standard design, mounting ring  calibration, testing and service unit  capsule-type pressure gauge  chromium plated sheet steel  contact type 821.21  diaphragm pressure gauge in robust design or for chemical applications  glycerine-filled Bourdon-tube pressure gauge  glycerine-filled bourdon-tube pressure gauge, CrNi steel type  glycerine-filled bourdon-tube pressure gauge, CrNi steel type, with solid baffle wall and blow-out (safety housing)  plunger rod with integrated vacuum guide  pre-wired  rack and pinion  robust bourdon-tube pressure gauge  robust Bourdon-tube pressure gauge with electrical contact (magnetic spring contact)  spring plunger with high-strength steel rod, guide sleeve and lower damping spring  steel chrome plated or black or with triangular bezel  Type "CA" = ground cover with threaded pin - swivel design  Type "CM" = ground cover with threaded pin round - swivel design  with male connector or welded connection on the pressure tap side  with pressure gauge  with pressure gauge and silencer  with pressure gauge and silencer, angled  with pressure gauge and with high performance muffler  with pressure gauge and with high performance muffler, angled  with switching function display unit 

L  LL  S 

2.1 bar 2.3 bar 2.5 bar 3.0 bar 3.4 bar 3.5 bar 4.0 bar 4.5 bar 5.0 bar 5.5 bar 6.0 bar 6.5 bar 7.0 bar 7.5 bar 8.0 bar 8.5 bar 9.0 bar 9.5 bar 10.0 bar 10.5 bar 12.0 bar 12.5 bar 13.0 bar 14.0 bar 15.0 bar 16.0 bar 17.0 bar 19.0 bar 20.0 bar 21.0 bar 22.0 bar 23.0 bar 26.0 bar 27.0 bar 28.0 bar 31.0 bar 34.0 bar 44.0 bar 45.0 bar

4.5 bar 5.0 bar 6.0 bar 10.0 bar 14.0 bar 16.0 bar 18.0 bar 20.0 bar 25.0 bar 30.0 bar 40.0 bar 50.0 bar 63.0 bar 64.0 bar

measuring connection G 1/8″ -28  measuring connection M 16 x 1.5  metric cylindrical outer thread 

BSP cylindrical internal threads  hose connection  metric cylindrical inner thread  metric cylindrical outer thread  pipe sockets  Vg 8 connecting thread 

1/2″ -14 NPT  1/2″ -20 UNF  7/16″ -20 UNF  G 1/2″ -14  G 1/4″ -19  G 1/8″  G 1/8″ -28  G 1″ -11  G 3/4″ -14  G 3/8″ -19  M 10 x 1  M 11 x 1  M 12 x 1.5  M 13 x 1  M 14 x 1  M 14 x 1.5  M 15 x 1  M 16 x 1.5  M 17 x 1  M 18 x 1.5  M 20 x 1  M 20 x 1.5  M 22 x 1.5  M 24 x 1  M 26 x 1.5  M 5 x 14  R 1/2″ K  R 1/4″ K  R 1/8″ K  R 3/8″ K  Rd 105 x 1/4″  Rd 32 x 1/8″  Rd 38 x 1/8″  Rd 46 x 1/6″  Rd 55 x 1/6″  Rd 62 x 1/6″  Rd 75 x 1/6″ 

-  0  0-1  1  1 (G 1/4 + G 3/8)  1 (G 1/4)  1 (G 1/4, G 3/8)  1 (G 3/8 + G 1/2)  1-3  1-4 (G 1/4 - G 1)  1/2  1/4  10  100  2  2 (G 1/2)  2 (G 3/4 + G 1)  2 (G 3/4)  2 (G 3/8 + G 1/2)  2 (G 3/8)  2+3  20  200  3  3/8  30  300  4  4 (G 3/4 + G 1)  4 (G 3/4)  400  50  600  7  70  size 1 (G1/4″ and G 3/8″ )  size 2 (G3/8″)  size 3 (G1/2″) and size 4 (G3/4″ and G1″)  special-filter (G3/4″ and G1″) 

12.0 mm 15.0 mm 18.0 mm 22.0 mm 28.0 mm 32.0 mm

1/4" -18 NPT  3/8" -18 NPT  G 1.1/2″ -11  G 1.1/4″ -11  G 1/2″ -14  G 1/4″ -19  G 1/8″ -28  G 1″ -11  G 2″ -11  G 3/4″ -14  G 3/8″ -19  M 12 x 1.5  M 14 x 1.5  M 16 x 1.5  M 18 x 1.5  M 22 x 1.5  M 26 x 1.5  M 5  R 1/4″ K  R 3/8″ K  Rd 32 x 1/8″ 

BSP cylindrical external threads  BSP cylindrical internal threads  claw coupling  connector Ø 7.2 mm  connector Ø 7.6 mm  cutting ring connection  hose connection  measuring connection M 16 x 1.5  metric cylindrical outer thread  NPT internal threads  pipe sockets  plug in sleeve  round external thread  sleeve Ø 7.2 mm  sleeve Ø 7.4 mm  sleeve Ø 7.6 mm  test connection  Vg 8 connecting thread 

air, hydraulic oil, oil emulsions, water  air, neutral gases (lubricated or unlubricated)  air, oil emulsions, water  air, vacuum  automotive technology  compressed air brake systems  compressed air, water, non-toxic and neutral gases, heating oil (EL),(S), lubricants, diesel oil, water based coatings  compressed air, water, non-toxic and non-corrosive gases, heating systems, agriculture  compressed air, water, oil  compressed air, water, oils, non-toxic gases  compressors  control lines in hydraulics and pneumatics  for compressed air supply in construction, compressors, hose lines and hammers  for compressors  for compressors, in harsh operating conditions in mining  gas, compressed air, water, oil, weak alkaline solutions  general application for air, water etc.  handling of highly sensitive parts  handling of highly uneven parts (e.g.tubes)  handling of narrow parts and bars  handling of parts which only have narrow and small places to grab them  handling of parts with plain to an slightly rough surface like sheets, cartons, glass, plastics  in construction, mining and tunnel building  industry and construction  laboratories and food industry  laboratory technology  low pressure range  mining  pneumatic applications  pneumatic, vacuum and food applications  quarrying, construction, shipyards, petrol stations  systems engineering  tank and equipment manufacture  water, gaseous and non-corrosive media, compressed air  welding equipment  welding machines  welding robots  welding-related areas 

102.6 mm  104.0 mm  107.8 mm  108.0 mm  108.5 mm  109.0 mm  109.5 mm  110.0 mm  111.5 mm  111.6 mm  112.0 mm  112.5 mm  114.0 mm  114.8 mm  117.8 mm  119.0 mm  122.0 mm  122.8 mm  123.5 mm  124.0 mm  126.0 mm  127.0 mm  128.5 mm  129.5 mm  131.0 mm  132.0 mm  133.5 mm  134.0 mm  134.1 mm  136.3 mm  136.6 mm  136.8 mm  137.0 mm  137.8 mm  138.1 mm  138.7 mm  139.0 mm  140.5 mm  141.0 mm  142.0 mm  142.5 mm  142.8 mm  143.0 mm  144.0 mm  144.5 mm  144.7 mm  145.1 mm  145.9 mm  147.0 mm  147.6 mm  148.0 mm  149.5 mm  150.0 mm  150.3 mm  151.5 mm  152.0 mm  152.1 mm  152.5 mm  153.0 mm  154.0 mm  155.0 mm  156.0 mm  157.0 mm  158.0 mm  160.0 mm  161.0 mm  162.0 mm  162.3 mm  163.4 mm  163.5 mm  164.0 mm  165.0 mm  165.5 mm  166.6 mm  167.0 mm  167.8 mm  168.0 mm  168.2 mm  169.0 mm  169.5 mm  170.0 mm  171.0 mm  175.0 mm  177.0 mm  177.7 mm  178.5 mm  179.5 mm  180.0 mm  180.8 mm (185.8 mm)*  181.0 mm  181.3 mm  181.8 mm  182.6 mm  182.7 mm (187.7 mm)*  182.8 mm  183.0 mm  183.7 mm  184.0 mm  184.5 mm  185.0 mm  185.5 mm  186.5 mm  187.0 mm  188.0 mm  188.5 mm  189.5 mm  190.0 mm  191.0 mm  191.5 mm  192.0 mm  192.1 mm  193.0 mm  194.0 mm  195.0 mm  196.0 mm  196.7 mm  197.0 mm  198.2 mm  198.6 mm  200.8 mm  201.0 mm  202.0 mm  203.0 mm  204.0 mm  205.0 mm  206.0 mm  208.2 mm  21.0 to 28.0 mm  210.0 mm  210.5 mm  213.0 mm  213.5 mm  214.5 mm  216.0 mm  217.0 mm  220.0 mm  223.4 mm  224.0 mm  225.0 mm  225.5 mm  226.0 mm  227.9 mm  228.0 mm  228.5 mm  229.0 mm  230.5 mm  232.5 mm  233.0 mm  234.0 mm  236.2 mm  240.0 mm  240.5 mm  242.0 mm  243.0 mm  246.0 mm  246.3 mm  247.0 mm  248.0 mm  25.0 mm  250.0 mm  252.5 mm  254.0 mm  255.0 mm  256.0 mm  257.0 mm  260.0 mm  261.0 mm  262.0 mm  264.0 mm  266.4 mm  266.8 mm  269.0 mm  270.4 mm  270.5 mm  273.0 mm  274.0 mm  280.5 mm  281.5 mm  282.8 mm  284.0 mm  285.0 mm  29.0 mm  294.0 mm  296.5 mm  299.0 mm  299.4 mm  302.0 mm  305.8 mm  307.7 mm  313.4 mm  316.0 mm  322.9 mm  323.0 mm  324.3 mm  329.0 mm  343.0 mm  359.0 mm  36.0 mm  361.0 mm  363.0 mm  376.0 mm  379.0 mm  38.0 to 48.0 mm  381.0 mm  381.4 mm  381.8 mm  382.8 mm  385.0 mm  39.5 to 49.5 mm  392.0 mm  40.0 mm  419.0 mm  44.0 mm  452.0 mm  454.6 mm  46.5 mm  47.5 to 60.5 mm  48.0 mm  49.0 to 62.0 mm  51.0 mm  52.0 mm  54.0 mm  54.2 mm  56.0 mm  57.6 mm  60.0 mm  65.5 mm  66.0 mm  67.0 mm  68.0 mm  70.0 mm  71.6 mm  72.0 mm  72.5 mm  75.0 mm  75.4 to 90.0 mm  75.9 to 90.5 mm  76.0 mm  76.3 mm  77.5 mm  78.0 mm  80.0 mm  80.5 mm  81.0 mm  81.4 mm  85.0 mm  87.5 mm  89.0 mm  9.0 mm  92.0 mm  93.0 mm  94.0 mm  94.8 mm  97.3 mm  98.0 mm 

AS-FS  D  ISE40A  MGP  MSQ  MXS  PF2A  PF3W  RB  VBAT 

BSP cylindrical external threads  BSP cylindrical internal threads  BSP nut thread  BSPT conical external threads  feed valve  for union nut  G 1/4″  hose connection  imperial banjo  measuring connection M 16 x 1.5  metric banjos  metric conical outer thread  metric cylindrical inner thread  metric cylindrical outer thread  metric nut thread  NPT external threads  pipe sockets  plug in sleeve  round external thread  round nut thread  sealing cone  UN/UNF inner thread  Vg 8 connecting thread 

2 x 3-pole terminals (EA 50), 1 x 3-pole terminal (EA 51)  2 x 3-pole terminals (EA 60), 1 x 3-pole terminal (EA 61)  4-pole connection for headset and battery charger, 3.5 mm stereo socket for sensor and cable connection  claw coupling  G 1/2” female thread  G 1/4″  G 1/4″ internal / external  G 3/4″ and G 1″ incl. PTFE-sealing at outer thread, G 1 1/4″ without sealing  hose connection  NAMUR-Interface, direct: 2 x G 1/8″  on manifold base  plug-in connection  Port 1: plug connection for hose outside Ø 4 mm; Port 2: G 1/8″ thread; relief port 3: M 5 thread  push-in connector  Push-in fitting for 4 mm hose  push-in for 4 mm tube  Schuko-plug  thread connector 

24° inner cone  butt construction  cutting ring connection  with copper ring 

0.5 - 10 bar  0.5 - 8 bar  Acc. to pilot regulator  corresponds to the set pressure of the pilot pressure regulator  Max. 20 bar (regulated: max. 16 bar)  Pa 0,5 - 8 bar (Standart)
Pa 0,1 - 1 bar
Pa 0,1 - 2 bar
Pa 0,2 - 4 bar
Pa 0,5 - 10 bar
Pa 0,5 - 16 bar 

BS 5200  DIN 2001  DIN 20030  DIN 20037  DIN 20038  DIN 3228  DIN 3238  DIN 3487  DIN 3489  DIN 3852  DIN 3863  DIN 3867  DIN 3872  DIN 74297  DIN 74297 Zn  DIN 74298  DIN 74304-A  DIN 74305  DIN 74310  DIN 7604  DIN 7642  DIN 7780  DIN 80705  DIN 8537 / 20033  DIN 8537 / 20036  EN ISO 2398  G-thread acc. to DIN EN ISO 228-1  G-thread according to DIN EN ISO 228-1, with O-ring  ISO 8434-1  ISO 8434-6  M-thread according to DIN 13-1, with O-ring  R-thread according to ISO 7-1  R-thread according to ISO 7-1, thread coating 

EPDM  Natural and synthetic rubber  NBR  Polyamide (PA)  Polyethylene  Polyurethane (PUR)  PVDF  SBR  Soft PVC  Soft-PVC, black  Soft-PVC, red, oil resistant 

1.4571  Acetal copolymer  Acetal copolymer body; nitrile O-ring  Acetalpolymerisat (POM)  Aluminium  Aluminium / POM  Aluminium handle  Aluminium housing  Aluminium UNI 9006/1 Al Mg 0.5 Si 0.4 Fe 0.2  Aluminium, painted black  Aluminium, unpainted  Anodised aluminium / technopolymer  ASTM F 36 J (NBR with aramid fibres)  Ball: Stainless steel  black malleable iron B350-10, design symbol A  black-finished steel  Brass  Brass ball, hard chrome-plated  Brass conical valve  Brass housing  Brass with a bare metal surface  Cap made of brass, housing made of plastic (PA)  Carbon steel  Cast iron  Copper  Copper alloy  Copper alloy resp. CrNi steel 1.4571  Coupling, unlocking sleeve, valve body and brass valve  CrNi steel 1.4571  Cu  Die-cast zinc  Elastomer O-ring double seal  galvanised steel  galvanised steel / brass  Griff aus Stahl, ab 2-1/2" Aluminium  Grivory plastic (PA 61/XT)  Hardened nickel-plated steel  Hardened zinc plated steel  Housing: Galvanised steel  HSS Steel  Iron  Malleable cast iron coupling head; Steel nozzle  Malleable iron  NBR - Acrylic-nitrile, butadiene rubber  Nickel-plated brass  Nickel-plated brass (banjo bolt), brass (ring nipple)  Nickel-plated iron  Nickel-plated steel  Nickel-plated steel, brass  Ohasil  Perbunan  Perfluoroalkoxy alkane (PFA)  Plastic  Plastic (ABS)  Plastic resp. nickel-plated brass  Polyamide (PA)  Polyamide PA 12, hard (according to DIN 73378)  Polyoxymethylene (POM)  Polypropylene (PP)  Polyurethane (PUR)  Polyurethane foam  Pressed brass  PTFE (Polytetrafluoroethylene)  PTFE ball seal  PVC with integrated special fabric  Rubber  Seal: FKM (FPM)  Seal: NBR  Seal: PTFE  Seal: Teflon/NBR  Silicone  Sleeve: Galvanised steel  Spring: Stainless steel  Springs, snap ring and pins made of stainless steel  Stainless steel  Stainless steel 1.4305  Stainless steel 1.4401  Stainless steel 1.4401 / 1.4408  Stainless steel 1.4404  Stainless steel 1.4404 (AISI 316L)  Stainless steel 1.4408  Stainless steel 1.4571  Steel  Steel (FeP04), plastic covered  Steel / composite material  Steel 1.0039, 1.0345  Steel handle with yellow plastic protection  Steel housing powder coated, perforated sheet galvanised steel, polyester felt discs  Steel resp. stainless steel  Steel ST 37-2 black  Steel, rubber  surface coated in aluminium  Surface treated aluminium  Technopolymer  Threaded piece: Galvanised steel  up to 10 bar: plastic Grivory (PA 61/XT) resp.; up to 16 bar: aluminium anodised black  Valve: Die cast zinc (Zamak)  Vulcanised fibre  Zinc  Zinc-plated steel ST 37-2 

high tear-resistant synthetic textile insert  none  one braided textile insert  one high-tensile synthetic thread braided insert  polyester braid  synthetic yarn braids  textile  textile braided or spiral