¿Qué está buscando?

Busque por artículos, productos, soluciones, etc...

¡Lo lamentamos!

Ningún resultado de búsqueda encontrado.

Inscripción

¿Ha olvidado su contraseña?

Are you a new customer?

Register and get many benefits:

Checking the product availability
Fast reordering & order history
Personal product recommendation
Payment by invoice
Registrarse ahora

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Phone
+1 713-466-6673
Opening hours 8-5, Monday - Friday

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
FAQs

K-KONSTANT DRUCKREGLER STANDARD 2

Constant-pressure regulators

Constant-pressure regulators

MAS_K-KONSTANT_DRUCKREGLER_STANDARD_2

The product image may differ

MAS_K-KONSTANT_DRUCKREGLER_STANDARD_2 MAS_K-KONSTANT_DRUCKREGLER_STANDARD_2
Modelo 3D
MAS_K-KONSTANT_DRUCKREGLER_STANDARD_2 MAS_K-KONSTANT_DRUCKREGLER_STANDARD_2 MAS_K-KONSTANT_DRUCKREGLER_STANDARD_2
Modelo 3D
Ambient temperature
Max. 90 °C 
Flow rate measurement
At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar 
Housing
zinc die-cast (G 1/4 to G 1/2), brass (G 3/4 to G 1 1/2) 
Descargar PDF

Seleccione un modelo

Show table of articles

Article

K- 07 25 03 98 K- 07 25 03 99 K- 07 25 04 00 K- 07 25 04 01 K- 07 25 04 02 K- 07 25 04 03 K- 07 25 04 04 K- 07 25 04 05 K- 07 25 04 06 K- 07 25 04 07 K- 07 25 04 08 K- 07 25 04 09 K- 07 25 04 10 K- 07 25 04 11 K- 07 25 04 12 K- 07 25 04 13 K- 07 25 04 14 K- 07 25 04 15 K- 07 25 04 16 K- 07 25 04 17

Características

Ambient temperature
  • Max. 90 °C 
Flow rate measurement
  • At P1 = 8 bar, P2 = 6 bar and pressure drop Δp = 1 bar 
Housing
  • zinc die-cast (G 1/4 to G 1/2), brass (G 3/4 to G 1 1/2) 
Input pressure
  • Max. 25 bar (G 1/4 to G 1/2), Max. 40 bar (G 3/4 to G 1 1/2) 
Media temperature
  • Max. 60 °C 
Seal
  • NBR 
Customs tariff number
  • 84811099 
Todas las características

Product description

Descripción
Reversible diaphragm pressure regulators, independent of inlet pressure, with self-relieving design.
Die Druckregler bleiben bei schwankendem Vordruck im Arbeitsdruck konstant.
Información adicional
User manual available on request

Variantes de producto

20 Resultados
Búsqueda
Mostrar dibujo acotado
Denominación
Thread
Control range
DN
Flow (l/min)
K- 07 25 03 98
G 3/4″ -14 
0.5 - 3 bar 
20 
8,700 l/min
Averiguar más
K- 07 25 03 99
G 3/4″ -14 
0.5 - 6 bar 
20 
8,200 l/min
Averiguar más
K- 07 25 04 00
G 3/4″ -14 
0.5 - 10 bar 
20 
7,830 l/min
Averiguar más
K- 07 25 04 01
G 3/4″ -14 
0.5 - 16 bar 
20 
7,400 l/min
Averiguar más
K- 07 25 04 02
G 3/4″ -14 
0.5 - 25 bar 
20 
6,500 l/min
Averiguar más
K- 07 25 04 03
G 1″ -11 
0.5 - 3 bar 
20 
8,700 l/min
Averiguar más
K- 07 25 04 04
G 1″ -11 
0.5 - 6 bar 
20 
8,200 l/min
Averiguar más
K- 07 25 04 05
G 1″ -11 
0.5 - 10 bar 
20 
7,830 l/min
Averiguar más
K- 07 25 04 06
G 1″ -11 
0.5 - 16 bar 
20 
7,400 l/min
Averiguar más
K- 07 25 04 07
G 1″ -11 
0.5 - 25 bar 
20 
6,500 l/min
Averiguar más
DN = nominal diameter, nominal width

Shows 10 of 20

Column selection

Thread
Control range
DN
Flow (l/min)
A (mm)
B
C (mm)
D (mm)
DN = nominal diameter, nominal width

Parts and Accessories

Replacements

MAS_K-RD_NIPPEL_KURZ_1

K-RD NIPPEL KURZ 1

23 Variantes

Reducing nipples, short type

Working pressure

10 bar

Ambient temperature

Max. +90 °C

Material

brass with a bare metal surface

Media temperature

Max. +90 °C

Customs tariff number

74122000
MAS_K-HALTERBAUSATZ_STANDARD

K-HALTERBAUSATZ STANDARD

13 Variantes

Holder

MAS_K-VERSCHLEI-SATZ

K-VERSCHLEI-SATZ

57 Variantes

Set of wearing parts

Customs tariff number

84819000
MAS_K-XV_AGM_2

K-XV AGM 2

37 Variantes

Double nipples, parallel male thread

Ambient temperature

Max. +90 °C

Material

brass with a bare metal surface

Media temperature

Max. +90 °C

Working pressure

10 bar

Customs tariff number

74122000